55Amp Plasma Cutter Non-Touch Pilot Arc Dual Voltage 110/220V Cut 14mm US STOCK

  

Tips for New Who Have Little to No Experience with A Plasma Cutter. Please spend some time cutting scrap pieces at beginning.

Please adjust the air regulator before use to prevent air leakage when the machine is in use. Please select the correct current, torch speed, and air pressure for the thickness and type of metal you want to cut. Please keep the torch tip clean and free from metal spatter. PILOT ARC Plasma Cutter Machine 1.

Ground Clamp 1 (1.5M). Air filter & regulator 1 (regulates 5884psi). Pilot Arc Ignition effectively cuts. Rough, painted, and rusty surfaces. Widely used in repairing work, metal processing, site work, home DIY hobbies, workshops, etc.

Ideal cutting thickness 10 mm. Maximum cut up to 14mm.

You can cut stainless steel, alloy steel, mild steel, copper, aluminum, and other metal materials. Portable & Easy Set Up.

Built-in over-heat protection, over-voltage protection, under-voltage protection, and overheat protection. Save energy and High cutting speed, cutting smooth, continuous current regulation. 1 Phase AC 220V±15%, 50/60Hz. Digital display for easy control of voltage and current. Over-current and air pressure light indicators for safety using. Select specific currents for various thicknesses.

Power switch in front for effective operation. Powerful fans to keep your device cool, so it doesn't overheat and die. Ventilation design ensures even heat distribution, so the machine doesn't overheat in one spot. Easy to assemble and does not require any special tools. Use enough Teflon tape and make sure Air Regulator is tightened properly.

And also the hose barb fitting to the back of the unit should be tightened properly as well. Compact and lightweight (8kg) design - perfect for welders on the go. Extremely ergonomic handle for optimal use and long-time working hours. Portable, so you can create your artwork virtually anywhere you like.