Amico CHF-60 is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use.
New digitally controlled 15 Amp to 60 Amp Plasma Cutter Machine with. Advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, CHF-60 Air Plasma Cutter cuts a thickness of 7/8 in. And the max severance thickness is 1.2 in. Technology, with an excellent Arc stability.Easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster. Can cut up to 7/8 in. Stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals. Straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes. 115-Volt and 230-Volt dual voltage, 50Hz/60Hz. Almost all of the voltage and frequency can be used. And is designed for both demanding industrial work, construction.
It requires less work to produce an overall better result with a cleaner cut. NPT 1/4 industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an. Automatic air control solenoid valve.
Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally. Supply Power: 115/230V, 50/60Hz, 1-Phase. Rated Input Current: 230V/38.8 Amp, 115V/54.0 Amp. Cutter Current Range: 230V/60 Amp, 115V/42 Amp. Nominal DC Open Circuit Voltage: 270V.
Duty Cycle104F (40c): 60% at 60 Amp. Output Terminal Type: Direct Wire. Cooling Method: Fan Air Cooled. 5.5 cfm at 75 psi.Maximum Severance Cutting Thickness: 1.2 in. Movement Speed: 15.0 in.
Net Weight: 23.1 lbs. Product Size: 17.91 x 7.87 x 13.86 in.
Package Weight: 37.1 lbs. 300 Amp Work Clamp Assembly. 230V to 115V Power Adapter. Air Filter (Installed inside the machine). The item "CHF-60, 60-Amp Plasma Cutter, Non-touch, Pilot Arc, 7/8 in.Clean Cut, 120/240V" is in sale since Thursday, February 13, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "dricotire1819" and is located in Rowland Heights, California. This item can be shipped to United States.