Plasma Cutter 50A Clean Cut 1/2'' 120V 240V IGBT Inverter Cutting Equipment USA

  
How a plasma cutter works? Work by sending an electric arc through a gas that is passing through a constricted opening. The gas can be shop air, nitrogen, argon, oxygen. This elevates the temperature of the gas to the point that it enters a 4th state of matter.

Scientists call this additional state plasma. As the metal being cut is part of the circuit, the electrical conductivity of the plasma causes the arc to transfer to the work. The plasma arc formation begins when gas is forced through a small nozzle orifice inside the torch. An electric arc generated from the external power supply is then introduced to this high pressured gas flow, resulting in what is commonly referred to as a "plasma jet". It immediately reaches up to 40,000° F, quickly piercing through the work piece and blowing away the molten material.

FLARING plasma cutters need compressed air to create the plasma. FC-550D plasma cutter equipment is a touch arc machine. 30A breaker for 240V recommended.

The FC-550D plasma cutter can work with generator(8000W above). What kind of gas do you need for a plasma cutter? Please observe all safety notes and precautions detailed in the manual. The sale service will be void if the machine be disassembly or modified without consent. Can this machine work with 110v?

Yes, for 110v, 120v, 220v and 240v. Upgrade from cloth to fire-resistant and heat-resistant rubber material. Use high-quality pure copper exquisite gun tip, wear-resistant and fast air, cutting efficiency increased to 2X. The length of the plasma cutting torch is 10ft. How to use the plasma cutter machine?

Please get supports in time if anything missed. Clamp the metal with ground clamp. A 3-YEAR service is provided for all the machines.

Failures other than the machine case can be replaced within 30 days if you have a problem with the machines. Local support is available for replacement, repair etc.

4 IGBT, stable and powerful. Industrial cooling fan, to improve the duty cycle. 4 rectifiers, 3 high-power large capacitors, making the machine more stable. The main transformer of all copper, the power is larger. FC550D is very suitable for home or small business projects! Cutting speed can reach 8000mm/min. The cutting speed needs to be determined according to the thickness and texture of the cut sheet. Cutting thick plates requires reduced movement speed.

It is recommended to use 30-60PSI(about 0.2-0.4Mpa) air pressure. To ensure that you can quickly use the machine. 40pcs as shown up in the picture.

Accurate Test: continuing to provide high current to ensure that each machine can bear still can stabilize output. Simulation Test: undergoes 30 minutes of simulation work, easily cope with voltage fluctuations. Manual Test: achieve easy arc, continuous arcing.

The FC-550D plasma cutting machine comes with dual voltage. IGBT inverter technology (the inverter frequency range is from 25-50KHz) to convert 50/60Hz alternating current (AC) to direct current (DC) and then to high frequency and lower voltage rectification. We are a traditional enterprise that integrates production, research, development and sales, have been deeply involved in the field of welding for nearly 10 years. With domestic and international basis as well as professional certification.