Plasma Cutter Machine Pilot Arc 55 AMP 110/220V FL550D Non Touch 1/2'' Clean Cut

  

How does plasma cutter work? Work by sending an electric arc through a gas that is passing through a constricted opening.

The gas can be shop air, nitrogen, argon, oxygen. This elevates the temperature of the gas to the point that it enters a 4th state of matter. Scientists call this additional state plasma. As the metal being cut is part of the circuit, the electrical conductivity of the plasma causes the arc to transfer to the work.

The plasma arc formation begins when gas is forced through a small nozzle orifice inside the torch. An electric arc generated from the external power supply is then introduced to this high pressured gas flow, resulting in what is commonly referred to as a "plasma jet". It immediately reaches up to 40,000° F, quickly piercing through the work piece and blowing away the molten material. FLARING plasma cutters need compressed air to create the plasma.

FL-550D is an non touch plasma cutter. 50A breaker for 110V and 30A for 220V recommended.

The FL-550D plasma cutter can work with a generator(5000W above). What kind of gas do you need for a plasma cutter? Please observe all safety notes and precautions detailed in the manual.

The sale service will be void if the machine be disassembly or modified without consent. Advantage of the plasma torch. Plasma cutter equipped with AG60 which is a non-touch cutting torch. Better for materials with coated, paint, stains, and rust on the surface with great effect.

Cutting faster, more efficient than touch arc plasma cutter. Consumables are durable than PT31 torch.

How to use the plasma cutter machine? Please get supports in time if anything missed.

Connect the ag60 non contact torch. Clamp the metal with ground clamp.

To ensure that you can quickly use the machine. 35pcs as shown up in the picture.

A 3-YEAR service provided for all the machines. Failures other than the machine case can be replaced within 30 days if you have a problem with the machines. Local support is available for replacement, repair etc. 4 IGBT, stable and powerful.

Industrial cooling fan, to improve the duty cycle. 4 rectifiers, 3 high-power large capacitors, making the machine more stable. The main transformer of all copper, the power is larger. Accurate Test: continuing to provide high current to ensure that each machine can bear still can stabilize output. Simulation Test: undergoes 30 minutes of simulation work, easily cope with voltage fluctuations.

Manual Test: achieve easy arc, continuous arcing. We are a traditional enterprise that integrates production, research, development and sales, has been deeply involved in the field of welding for nearly 10 years. With domestic and international basis as well as professional certification.

The FL-550D plasma cutting machine comes with 110V/220V voltage conversion cable which can recognize the voltage automatically. Attention:it is recommended to use a circuit breaker above 40A for 220V, but 60A for 110V. Any kind of metal that is electrically conductive is well suited.

You can cut these kinds of metal from a sheet metal thickness of 1-2mm up to 1-2 inches.